All Operating System Compatibility

CAESARII | CADWorxPlantProfessional | CADWorxP&IDProfessional | OrthoGenforCADWorx | CADWorxStructure | CADWorxSteel | CADWorxEquipment | CADWorxDesignReview | CADWorxfieldPipe | PVElite | CodeCalc | TANK | PVFabricator | FEATools | GTSTRUDL | CAESARIIVideoTraining | GTSTRUDLTraining | VisualVesselDesign | NozzlePRO | PRGFEATools | PRGNozzlePRO | SoftwareCompliance |

CAESAR II

Intergraph® CAESAR II® is compatible with Windows desktop operating systems listed below.

Note: The operating system compatibility details that follow refer to the latest released version of this software. Previous versions of the software may not work with newer operating systems.

Additional details on the life-cycle of Microsoft operating systems can be obtained from
Microsoft’s web site at:
http://www.microsoft.com/windows/lifecycle/ 

 

Desktop Operating System

Compatibility Information

Windows 7/8/8.1/10* Professional (32- and 64-bit)
Windows 7 Ultimate (32- and 64-bit)
Windows 7/8/8.1/10* Enterprise (32- and 64-bit)

 

These operating systems are tested by Intergraph. CAESAR II does not support Windows 7/8/8.1 Starter, Home Basic, and Home Premium. The software does not support Windows XP, Windows Vista Starter, and Home ersions of Windows 7/8/8.1 (i.e., Starter, Home Basic, Home Premium).
* Windows 8/8.1 - Enable .NET 4.5.2 from your Control Panel prior to installing CAESAR II.

Windows Server (all versions)

Only tested by Intergraph for the installation of network licensing systems (NetHASP License Manager).

Intergraph Recommended System Requirements for CAESAR II:

  • Processor: 3.0 GHz Intel Pentium IV or higher AMD Athlon dual-core processor or higher
  • Memory: 4 GB RAM or higher (Windows 7/8/8.1)
  • Display: 1280x1024 or higher, with True Color
  • Video Card: 256 MB or greater video RAM, OpenGL 1.1 or later, DirectX 9.0 or later, drivers updated with the latest manufacturer's drivers (Motherboard-integrated video cards not recommended for desktop systems.)
  • Remote Technologies: Citrix XenApp 6.0 required on Windows Server 2008 R2 Enterprise
  • Software: Adobe Reader 8.0 or later.

 

back to top

 
CADWorx Plant Professional

Minimum system requirements to run Intergraph CADWorx Plant Design Suite are those recommended for the version of AutoCAD (or Autodesk vertical product) that you have chosen to use as your design platform. For product specific installation requirements refer to the product installation guide.

    back to top

     
    CADWorx P&ID Professional

    Minimum system requirements to run Intergraph CADWorx Plant Design Suite are those recommended for the version of AutoCAD (or Autodesk vertical product) that you have chosen to use as your design platform. Refer to the applicable Autodesk Product System Requirements on the Autodesk website here. For product specific installation requirements refer to the product installation guide.

    back to top

     
    OrthoGen for CADWorx

    Standard Edition:

    • 3.0 GHz Intel Pentium IV or greater
    • Windows XP Professional or later
    • 2 GB RAM
    • 1600x1200 with true color
    • 128 MB or greater OpenGL-capable graphics card

     


    back to top

     
    CADWorx Structure

    Minimum system requirements to run Intergraph CADWorx Plant Design Suite are those recommended for the version of AutoCAD (or Autodesk vertical product) or BricsCAD that you have chosen to use as your design.  

    Recommended System:

    • Intelligent 3D Piping Design
    • 3.0 GHz Intel Pentium IV or greater
    • Windows 7 Professional or later
    • 2 GB RAM
    • 1600x1200 with True Color
    • 128 MB or greater OpenGL-capable graphics card

    Compatible with the following versions of AutoCAD:

    • AutoCAD 2017 (64 bit)
    • AutoCAD 2016 (64 bit)

        Not Compatible with:

      • AutoCAD LT
      • Autodesk Inventor
      • Autodesk Revit

      Compatible with the following versions of BricsCAD:

      • BricsCAD 17.2

       

       

       

       

       

      back to top

       
      CADWorx Steel

      Minimum system requirements to run Intergraph CADWorx Plant Design Suite are those recommended for the version of AutoCAD (or Autodesk vertical product) that you have chosen to use as your design.  

      Recommended System:

      • Intelligent 3D Piping Design
      • 3.0 GHz Intel Pentium IV or greater
      • Windows 7 Professional or later
      • 2 GB RAM
      • 1600x1200 with True Color
      • 128 MB or greater OpenGL-capable graphics card

      Compatible with the following verstions of AutoCAD:

      • AutoCAD 2015 (32 bit) / AutoCAD 2015 (64 bit)
      • AutoCAD 2014 (32 bit) / AutoCAD 2014 (64 bit)
      • AutoCAD 2013 (32 bit) / AutoCAD 2013 (64 bit)
      • AutoCAD 2012 (32 bit) / AutoCAD 2012 (64 bit)
      Compatible with the following Autodesk vertical products (2015-2012):
      • AutoCAD Architecture
      • AutoCAD Civil 3D
      • AutoCAD Electrical
      • AutoCAD Map 3D
      • AutoCAD Mechanical
      • AutoCAD MEP

        Not Compatible with:

      • AutoCAD LT
      • Autodesk Inventor
      • Autodesk Revit


       

       

       

       

      back to top

       
      CADWorx Equipment

      Minimum system requirements to run Intergraph CADWorx Plant Design Suite are those recommended for the version of AutoCAD (or Autodesk vertical product) that you have chosen to use as your design platform. Refer to the applicable Autodesk Product System Requirements on the Autodesk website here. For product specific installation requirements refer to the product installation guide.

      back to top

       
      CADWorx Design Review

      Intergraph® CADWorx ® Design Review is compatible with Windows desktop operating systems listed below.

      Note: The operating system compatibility details that follow refer to the latest released version of this software. Previous versions of the software may not work with newer operating systems.

      Additional details on the life-cycle of Microsoft operating systems can be obtained from
      Microsoft’s web site at:
      http://www.microsoft.com/windows/lifecycle/ 

       

      Desktop Operating System

      Compatibility Information

      Windows 10 (desktop OS)
      Windows 7 SP1

       

      These operating systems are tested by Intergraph. The software does not support Windows XP, Windows Vista Starter, and Windows 8/8.1.

      Windows Server (all versions)

      Only tested by Intergraph for the installation of network licensing systems (NetHASP License Manager).

      Intergraph Recommended System Requirements for CADWorx Design Review 2017 (64-bit):

      • Processor: 3.0 GHz Intel Pentium IV or higher
      • Memory: 4 GB RAM or higher (8GB recommended)
      • Display: 1360x768 or higher (1600x1050 or higher recommended) with True Color.
      • Video Card: Windows display adapter capable of 1360x768 with True Color capabilities and DirectX 9. Direct 11 compliant card recommended.
      • .NET Framework: .NET Framework Version 4.5

      Additional Requirements for Large Datasets

      • Memory: 8GB RAM or higher
      • Display Card:
        -1600x1050 or greater True Color video display adapter; 128 MB VRAM or greater; Pixel Shader 3.0 or greater; Direct3D-capable workstation class graphics card
        - AMD or NVidia graphical drivers with latest update

      back to top

       
      CADWorx fieldPipe

      Minimum system requirements to run Intergraph CADWorx Plant Design Suite are those recommended for the version of AutoCAD (or Autodesk vertical product) that you have chosen to use as your design platform. Refer to the applicable Autodesk Product System Requirements on the Autodesk website. For fieldPipe specific installation requirements refer to the product installation guide.

      Note:
      The compatibility details that follow refer to the CADWorx fieldPipe 2016 released version.

      Compatible with the following versions of AutoCAD:

      • AutoCAD 2016 (64 bit)
      • AutoCAD 2015 (64 bit)
      • AutoCAD 2014 (64 bit)
      • AutoCAD 2013 (64 bit)

      Not compatible with the following versions of AutoCAD:

      • AutoCAD 2017 (64 bit) or newer

      Compatible with the following Windows Operating Systems:

      • Windows 7

      Not compatible with the following Windows Operating Systems:

      Windows 8, 10, or newer

      back to top

       
      PV Elite

      Intergraph® PV Elite® is compatible with Windows desktop operating systems listed below.

      Note:
      The operating system compatibility details that follow refer to the latest released version of this software. Previous versions of the software may not work with newer operating systems.

      Additional details on the life-cycle of Microsoft operating systems can be obtained from
      Microsoft’s web site at:
      http://www.microsoft.com/windows/lifecycle/ 

       

      Desktop Operating System

      Compatibility Information


      Windows 7/8/8.1/10* Professional (64-bit)
      Windows 7/8/8.1* Ultimate (64-bit)
      Windows 7/8/8.1/10* Enterprise (64-bit)

       

      PV Elite Development tests these operating systems.

      PV Elite does not support Windows 7/
      8/8.1/10 Starter, Home Basic, and Home Premium. The software does not support Windows Vista Starter, Home Basic, Home Premium, Enterprise, Business, and Ultimate.

      * Windows 8/8.1 - Enable .Net 3.5 prior to installing PV Elite.

       

      Windows Server (all versions)

      Only tested by Intergraph for the installation of network licensing systems (NetHASP License Manager).

      Intergraph Recommended System Requirements for PV Elite:

      • Processor: 3.0 GHz Intel Pentium IV or higher AMD Athlon dual-core processor or higher
      • Memory: 4 GB RAM or higher (Windows 7/8/8.1)
      • Display: 1280x1024 or higher, with True Color
      • Video Card: 256 MB or greater video RAM, OpenGL 1.1 or later, DirectX 9.0 or later, drivers updated with the latest manufacturer's drivers (Motherboard-integrated video cards not recommended for desktop systems.)
      • Remote Technologies: Citrix XenApp 6.0 required on Windows Server 2008 R2 Enterprise
      back to top

      back to top

       
      CodeCalc

      Intergraph® CodeCalc® is compatible with the Windows desktop operating systems listed below.

      Note: 
      The operating system compatibility details that follow refer to the latest released version of this software. Previous versions of the software may not work with newer operating systems.

      Additional details on the life-cycle of Microsoft operating systems can be obtained from Microsoft’s web site at: http://www.microsoft.com/windows/lifecycle/  

       

      Desktop Operating System

      Compatibility Information

      Windows 7/8/8.1/10* Professional (64-bit)
      Windows 7/8/8.1* Ultimate (64-bit) 
      Windows 7/8/8.1/10* Enterprise (64-bit)

       

      These operating systems are tested by Intergraph. 

      PV Elite does not support Windows 7/
      8 Starter, Home Basic, and Home Premium. The software does not support Windows Vista Starter, Home Basic, Home Premium, Enterprise, Business, and Ultimate.

      *Windows 8/8.1 - Enable .NET 3.5 from your Control Panel prior to installing PV Elite.

      Windows Server (all versions)

      Only tested by Intergraph for the installation of network licensing systems (NetHASP License Manager).

      Intergraph Recommended System Requirements for PV Elite:

      • Processor: 3.0 GHz Intel Pentium IV or higher AMD Athlon dual-core processor or higher
      • Memory: 4 GB RAM or higher (Windows 7/8/8.1)
      • Display: 1280x1024 or higher, with True Color
      • Video Card: 256 MB or greater video RAM, OpenGL 1.1 or later, DirectX 9.0 or later, drivers updated with the latest manufacturer's drivers (Motherboard-integrated video cards not recommended for desktop systems.)
      • Remote Technologies: Citrix XenApp 6.0 required on Windows Server 2008 R2 Enterprise
      back to top

       
      TANK

      Intergraph® TANK is compatible with Windows desktop operating systems listed below.

      Note: The operating system compatibility details that follow refer to the latest released version of this software. Previous versions of the software may not work with newer operating systems.

      Additional details on the life-cycle of Microsoft operating systems can be obtained from
      Microsoft’s web site at:
      http://www.microsoft.com/windows/lifecycle/ 

       

      Desktop Operating System

      Compatibility Information

      Windows 7/8/8.1/10 Professional (64-bit)
      Windows 7/8/8.1 Ultimate (64-bit)
      Windows 7/8/8.1/10 Enterprise (64-bit)

       

      These operating systems are tested by Intergraph. TANK does not support Windows 7/8/8.1/10 Starter, Home Basic, and Home Premium. The software does not support Windows Vista Starter, Home Basic, Home Premium, Enterprise, Business, and Ultimate.

      Windows Server (all versions)

      Only tested by Intergraph for the installation of network licensing systems (NetHASP License Manager).

      Intergraph Recommended System Requirements for TANK:

      • Processor: 3.0 GHz Intel Pentium IV or higher AMD Athlon dual-core processor or higher
      • Memory: 4 GB RAM or higher (Windows 7/8/8.1)
      • Display: 1280x1024 or higher, with True Color
      • Video Card: 256 MB or greater video RAM, OpenGL 1.1 or later, DirectX 9.0 or later, drivers updated with the latest manufacturer's drivers (Motherboard-integrated video cards not recommended for desktop systems.)
      • Remote Technologies: Citrix XenApp 6.0 required on Windows Server 2008 R2 Enterprise
      back to top

       
      PV Fabricator

       The minimum system requirements to run are those recommended for the version of AutoCAD (or Autodesk vertical product) that you have chosen to use as your design platform

      Recommended System Requirement for:

      • 3.0 GHz Intel Pentium IV or greater

      • Windows XP Professional or later

      • 2 GB RAM

      • 1600x1200 with true color

      • 128 MB or greater OpenGL-capable graphics card
       

      Compatible with the following AutoCAD versions:

      - AutoCAD 2013-2010 (32bit/64bit)

      Compatible with the following Autodesk vertical products (2013-2010):

      AutoCAD Architecture

      • AutoCAD Civil 3D

      • AutoCAD Electrical

      • AutoCAD Map 3D

      • AutoCAD Mechanical

      • AutoCAD MEP

      NOT compatible with:

      • AutoCAD LT

      • Autodesk Inventor

      • Autodesk Revit
        
      back to top

       
      FEATools

      PRG FEATools™ is compatible with Windows desktop operating systems listed below. FEA Tools has the same system requirements as Intergraph CAESAR II (listed below).

      Note: The operating system compatibility details that follow refer to the latest released version of this software. Previous versions of the software may not work with newer operating systems.

      Additional details on the life-cycle of Microsoft operating systems can be obtained from
      Microsoft’s web site at:
      http://www.microsoft.com/windows/lifecycle/ 

       

      Desktop Operating System

      Compatibility Information

      Windows 7/8* Professional (32 & 64 bit)
      Windows 7/8* Ultimate (32 & 64 bit)
      Windows 7/8* Enterprise (32 & 64 bit)

      These operating systems are tested by Intergraph. CAESAR II does not support Windows 7/8 Starter, Home Basic, and Home Premium. The software does not support Windows Vista Starter, Home Basic, Home Premium, Enterprise, Business, and Ultimate.

      Windows XP Professional with SP3 (32 bit)

      This operating system is tested by Intergraph.

      Windows Server (all versions)

      Only tested by Intergraph for the installation of network licensing systems (NetHASP License Manager).

      Intergraph Recommended System Requirements for CAESAR II:

      • Processor: 3.0 GHz Intel Pentium IV or higher AMD Athlon dual-core processor or higher
      • Memory: 2 GB RAM or higher (Windows XP) or 4 GB RAM or higher (Windows 7/8)
      • Display: 1280x1024 or higher, with True Color
      • Video Card: 256 MB or greater video RAM, OpenGL 1.1 or later, DirectX 9.0 or later, drivers updated with the latest manufacturer's drivers (Motherboard-integrated video cards not recommended for desktop systems.)
      • Remote Technologies: Citrix XenApp 6.0 required on Windows Server 2008 R2 Enterprise

      back to top

       
      GTSTRUDL

      Intergraph® GT STRUDL®

      Note: The operating system compatibility details that follow refer to the latest released version of this software. Previous versions of the software may not work with newer operating systems.

      Microsoft® Windows®-compatible.

      Intergraph Recommended System Requirements:

      • Processor: 3.0 GHz Intel Pentium IV or higher AMD Athlon dual-core processor or higher
      • Memory: 2 GB RAM or higher (Windows XP) or 4 GB RAM or higher (Windows 7/8)
      • Display: 1280x1024 or higher, with True Color
      • Video Card: 256 MB or greater video RAM, OpenGL 1.1 or later, DirectX 9.0 or later, drivers updated with the latest manufacturer's drivers (Motherboard-integrated video cards not recommended for desktop systems.)


      back to top

       
      CAESAR II Video Training

      Intergraph® CAESAR II® Fundamentals Course is an online course that can be accessed via any desktop, laptop, tablet or phone with an internet connection.

      To run through examples in the course on CAESAR II, please review the system requirements below.

      Intergraph® CAESAR II® is compatible with Windows desktop operating systems listed below.

      Note: The operating system compatibility details that follow refer to the latest released version of this software. Previous versions of the software may not work with newer operating systems.

      Additional details on the life-cycle of Microsoft operating systems can be obtained from
      Microsoft’s web site at:
      http://www.microsoft.com/windows/lifecycle/ 

       

      Desktop Operating System

      Compatibility Information

      Windows 7/8* Professional (32 & 64 bit)
      Windows 7/8* Ultimate (32 & 64 bit)
      Windows 7/8* Enterprise (32 & 64 bit)

      These operating systems are tested by Intergraph. CAESAR II does not support Windows 7/8 Starter, Home Basic, and Home Premium. The software does not support Windows Vista Starter, Home Basic, Home Premium, Enterprise, Business, and Ultimate.
      * Windows 8 - Enable .NET 3.5 from your Control Panel prior to installing CAESAR II.

      Windows XP Professional with SP3 (32 bit)

      This operating system is tested by Intergraph.

      Windows Server (all versions)

      Only tested by Intergraph for the installation of network licensing systems (NetHASP License Manager).

      Intergraph Recommended System Requirements for CAESAR II:

      • Processor: 3.0 GHz Intel Pentium IV or higher AMD Athlon dual-core processor or higher
      • Memory: 2 GB RAM or higher (Windows XP) or 4 GB RAM or higher (Windows 7/8)
      • Display: 1280x1024 or higher, with True Color
      • Video Card: 256 MB or greater video RAM, OpenGL 1.1 or later, DirectX 9.0 or later, drivers updated with the latest manufacturer's drivers (Motherboard-integrated video cards not recommended for desktop systems.)
      • Remote Technologies: Citrix XenApp 6.0 required on Windows Server 2008 R2 Enterprise

      back to top

       
      GTSTRUDL Training

      Intergraph® GT STRUDL®

      Note: The operating system compatibility details that follow refer to the latest released version of this software. Previous versions of the software may not work with newer operating systems.

      Microsoft® Windows®-compatible.

      Intergraph Recommended System Requirements:

      • Processor: 3.0 GHz Intel Pentium IV or higher AMD Athlon dual-core processor or higher
      • Memory: 2 GB RAM or higher (Windows XP) or 4 GB RAM or higher (Windows 7/8)
      • Display: 1280x1024 or higher, with True Color
      • Video Card: 256 MB or greater video RAM, OpenGL 1.1 or later, DirectX 9.0 or later, drivers updated with the latest manufacturer's drivers (Motherboard-integrated video cards not recommended for desktop systems.)
      back to top

       
      Visual Vessel Design

      Intergraph® Visual Vessel Design is compatible with Windows desktop operating systems listed below.

      Note:
      The operating system compatibility details that follow refer to the latest released version of this software. Previous versions of the software may not work with newer operating systems.

      Additional details on the life-cycle of Microsoft operating systems can be obtained from
      Microsoft’s web site at:
      http://www.microsoft.com/windows/lifecycle/ 

       

      Desktop Operating System

      Compatibility Information

      Windows 7/8/8.1* Professional (32 & 64 bit)
      Windows 7/8/8.1* Ultimate (32 & 64 bit)
      Windows 7/8/8.1* Enterprise (32 & 64 bit)

       

      Visual Vessel Design Development tests these operating systems. Visual Vessel Design does not support Windows 7/8/8.1 Starter, Home Basic, and Home Premium. The software does not support Windows Vista Starter, Home Basic, Home Premium, Enterprise, Business, and Ultimate.
      * Windows 8/8.1 - Enable .Net 3.5 prior to installing Visual Vessel Design.

       

       

       

       

      Windows XP Professional with SP3 (32 bit)

      NOTE: Microsoft Support of this OS ends in April 2014. This operating system is not recommended.

       

      Windows Server (all versions)

      Only tested by Intergraph for the installation of network licensing systems (NetHASP License Manager).

      Intergraph Recommended System Requirements for Visual Vessel Design:

      • Processor: 3.0 GHz Intel Pentium IV or higher AMD Athlon dual-core processor or higher
      • Memory: 4 GB RAM or higher (Windows 7/8/8.1)
      • Display: 1280x1024 or higher, with True Color
      • Video Card: 256 MB or greater video RAM, OpenGL 1.1 or later, DirectX 9.0 or later, drivers updated with the latest manufacturer's drivers (Motherboard-integrated video cards not recommended for desktop systems.)
      • Remote Technologies: Citrix XenApp 6.0 required on Windows Server 2008 R2 Enterprise
      back to top

       
      NozzlePRO

      NozzlePRO is compatible with Windows desktop operating systems listed below.

      Note: The operating system compatibility details that follow refer to the latest released version of this software. Previous versions of the software may not work with newer operating systems.

      Additional details on the life-cycle of Microsoft operating systems can be obtained from
      Microsoft’s web site at:
      http://www.microsoft.com/windows/lifecycle/ 

       

      Desktop Operating System

      Compatibility Information

      Windows 7/8/8.1* Professional (32- and 64-bit)
      Windows 7/8/8.1* Ultimate (32- and 64-bit)
      Windows 7/8/8.1* Enterprise (32- and 64-bit)

       

      These operating systems are tested by Intergraph. CAESAR II does not support Windows 7/8/8.1 Starter, Home Basic, and Home Premium. The software does not support Windows Vista Starter, Home Basic, Home Premium, Enterprise, Business, and Ultimate.
      * Windows 8/8.1 - Enable .NET 3.5 from your Control Panel prior to installing CAESAR II.

      Windows Server (all versions)

      Only tested by Intergraph for the installation of network licensing systems (NetHASP License Manager).

      Intergraph Recommended System Requirements for NozzlePRO:

      • Processor: 3.0 GHz Intel Pentium IV or higher AMD Athlon dual-core processor or higher
      • Memory: 4 GB RAM or higher (Windows 7/8/8.1)
      • Display: 1280x1024 or higher, with True Color
      • Video Card: 256 MB or greater video RAM, OpenGL 1.1 or later, DirectX 9.0 or later, drivers updated with the latest manufacturer's drivers (Motherboard-integrated video cards not recommended for desktop systems.)
      • Remote Technologies: Citrix XenApp 6.0 required on Windows Server 2008 R2 Enterprise

       

      back to top

       
      PRGFEATools

      PRG FEATools™ is compatible with Windows desktop operating systems listed below. FEA Tools has the same system requirements as Intergraph CAESAR II (listed below).

      Note: The operating system compatibility details that follow refer to the latest released version of this software. Previous versions of the software may not work with newer operating systems.

      Additional details on the life-cycle of Microsoft operating systems can be obtained from
      Microsoft’s web site at:
      http://www.microsoft.com/windows/lifecycle/ 

       

      Desktop Operating System

      Compatibility Information

      Windows 7/8* Professional (32 & 64 bit)
      Windows 7/8* Ultimate (32 & 64 bit)
      Windows 7/8* Enterprise (32 & 64 bit)

      These operating systems are tested by Intergraph. CAESAR II does not support Windows 7/8 Starter, Home Basic, and Home Premium. The software does not support Windows Vista Starter, Home Basic, Home Premium, Enterprise, Business, and Ultimate.

      Windows XP Professional with SP3 (32 bit)

      This operating system is tested by Intergraph.

      Windows Server (all versions)

      Only tested by Intergraph for the installation of network licensing systems (NetHASP License Manager).

      Intergraph Recommended System Requirements for CAESAR II:

      • Processor: 3.0 GHz Intel Pentium IV or higher AMD Athlon dual-core processor or higher
      • Memory: 2 GB RAM or higher (Windows XP) or 4 GB RAM or higher (Windows 7/8)
      • Display: 1280x1024 or higher, with True Color
      • Video Card: 256 MB or greater video RAM, OpenGL 1.1 or later, DirectX 9.0 or later, drivers updated with the latest manufacturer's drivers (Motherboard-integrated video cards not recommended for desktop systems.)
      • Remote Technologies: Citrix XenApp 6.0 required on Windows Server 2008 R2 Enterprise

      back to top

       
      PRGNozzlePRO

      NozzlePRO is compatible with Windows desktop operating systems listed below.

      Note: The operating system compatibility details that follow refer to the latest released version of this software. Previous versions of the software may not work with newer operating systems.

      Additional details on the life-cycle of Microsoft operating systems can be obtained from
      Microsoft’s web site at:
      http://www.microsoft.com/windows/lifecycle/ 

       

      Desktop Operating System

      Compatibility Information

      Windows 7/8/8.1* Professional (32- and 64-bit)
      Windows 7/8/8.1* Ultimate (32- and 64-bit)
      Windows 7/8/8.1* Enterprise (32- and 64-bit)

       

      These operating systems are tested by Intergraph. CAESAR II does not support Windows 7/8/8.1 Starter, Home Basic, and Home Premium. The software does not support Windows Vista Starter, Home Basic, Home Premium, Enterprise, Business, and Ultimate.
      * Windows 8/8.1 - Enable .NET 3.5 from your Control Panel prior to installing CAESAR II.

      Windows Server (all versions)

      Only tested by Intergraph for the installation of network licensing systems (NetHASP License Manager).

      Intergraph Recommended System Requirements for NozzlePRO:

      • Processor: 3.0 GHz Intel Pentium IV or higher AMD Athlon dual-core processor or higher
      • Memory: 4 GB RAM or higher (Windows 7/8/8.1)
      • Display: 1280x1024 or higher, with True Color
      • Video Card: 256 MB or greater video RAM, OpenGL 1.1 or later, DirectX 9.0 or later, drivers updated with the latest manufacturer's drivers (Motherboard-integrated video cards not recommended for desktop systems.)
      • Remote Technologies: Citrix XenApp 6.0 required on Windows Server 2008 R2 Enterprise

       

      back to top

       
      Software Compliance

      Software License Compliance

      Intergraph is dedicated to guaranteeing the preservation of Intergraph’s rights and its software end-users’ rights.  Due to the worldwide commerce involved, Intergraph is committed to protecting its own investments and its customers’ investments by enforcing fair competition and the correct use of legal licenses of software products in the marketplace.  
      back to top

       
       

      [Go Back]