CAESAR II 2011 (5.30) - Build Summary  (Document #: C2_B102)

  110830    - August   30, 2011    (B)  5.30.02 SP2
  110228    - February 28, 2011    (A)  5.30.01 SP1
  Released  - November 22, 2010         5.30.00





************************************************************************
CAESAR II Version 2011 (5.30) - Build: 110830 - Service Pack 2

The following modifications and corrections are included in this build.

************************************************************************

==================== CORRECTIONS =======================================


C2GRAPHICS.DLL   - Fixed drawing fitting-to-fitting bends.

                 - Corrected top/bottom view model orientation.


C2UTILS.DLL      - Reset "batch run" flag in the event an invalid 
                   account number is encountered.

                 - Updated Intergraph "technical support" information.

DYNOUT1.EXE      - Corrected the computation of the bending stress at the
                   "from end" of elements for PD-8010-2 (to use SIF for 
                   the "from end" instead of the "to end").

IECHO.EXE        - Corrected to read pre-5.30 CII files.

                 - Corrected the location of the "equipment check" counter
                   in the neutral file.

INCORE.EXE       - Improved iteration checks for the "loop wizard"

OUTP01.EXE       - Corrected the computation of the bending stress at the
                   "from end" of elements for PD-8010-2 (to use SIF for 
                   the "from end" instead of the "to end").

OUTP02.EXE       - Edits to Piping Code dates.

                 - Corrected the reporting of the "hanger size" value
                   for the Basic Engineers spring table.


PIERCK.DLL       - Corrected the boundary condition verification (check)
PIERCK.EXE         for "nozzle limit definitions" (to address nozzle
                   CNodes).

                 - Changed how the duplication of allowable stress data
                   is implemented.

                 - Line number (speed) improvements.

PREPIP.EXE       - Line number improvements.

                 - Break operation corrected for elements with flanges 
                   and nozzles.

                 - Improved iteration checks for the "loop wizard"

                 - Corrected the transfer of API-650 displacements to
                   the piping input dialog.



==================== ENHANCEMENTS / MODIFICATIONS ======================



ANAL1.EXE        - Increased memory space for specified global coordinates.

                 - Modified to limit flange rating specifications for
                   combination load cases.

C2.EXE           - Modified "build date"

C2DATA.EXE       - Increased memory space for specified global coordinates.

C2ISOGEN.EXE     - Relinked for compatibility with corrected DLLs.

C2PP.EXE         - Increased memory space for specified global coordinates.

C2S.EXE          - Modified the display format

C2U.EXE          - Updates for Line Number improvements.

                 - Adjustment to the meshing algorithm for bend elements 
                   with flanges.

INTGRPH.EXE      - Increased memory space for specified global coordinates.

PCFINTERFACE.EXE - PCF import improvements

PIPINGINPUT.DLL  - PCF import improvements.

                 - Line number improvements.

RUNWRC.EXE       - Incorporated the WRC297 stress summations.




************************************************************************
CAESAR II Version 2011 (5.30) - Build: 110228 - Service Pack 1

The following modifications and corrections are included in this build.

************************************************************************

==================== CORRECTIONS =======================================

ANAL1.EXE      - Revised the logic for load case recommendations.

C2DOCUMENTS.PDX-  Revised index file for "combined document search".

C2EXPORT.EXE   - Corrected the handling of the default "access"
                 templates.

CCDATA.DLL     - Corrected the implementation of user specified units in
CCPROC.DLL       the WRC calculations.

GETC2LOADS.DLL - Corrected the setup of units conversion factors when
                 acquiring data from output for auxiliary modules.

Index.idx      - Revised index file for "combined document search".
Index1.idx

OUTP02.EXE     - Addressed "bad parameter" message when attempting to
OUTWORD.DLL      turn off "spelling/grammar checks".

PIERCK.DLL     - Corrected the check for "non-existent" direction cosines.

PREPIP.EXE     - Corrected the unit conversion of the "flange G" value.

               - Corrected a problem with the "Loop Wizard" when working
                 with "Z up" jobs.

               - Corrected a problem with the "Loop wizard" when "tabbing"
                 through the dialog.

               - Corrected a "node renumber" problem for the 2nd, 3rd, and
                 4th entries on the auxiliary dialogs.

               - Corrected the "displacement export routine" to properly
                 assign global coordinates to CNodes.

               - Corrected a number of issues with "line numbers",
                 including the "SaveAs" function.

RUNWRC         - Corrected the implementation of user specified units.

STRESSISOPROJECT.DLL - Corrected dimension problem for angle valves in 
                 Isogen export.


==================== ENHANCEMENTS / MODIFICATIONS ======================



C2.EXE         - Modified "build date"

C2QUICK.PDF    - Quick Reference Guide regenerated for indexing and
                 additional "silent install" switches.

PCFINTERFACE.EXE - General improvements to the PCF interface

PIPINGINPUT.DLL  - General improvements to the PCF interface

StressIsoProject.dll - Added coordinate calculations based on specified
                 initial coordinates.

************************************************************************